Programming Memory Map
| Address | Default Data | Comment |
|---|
| 00 | 01 | enable flag
00 Primary & Secondary off
01 Primary repeater enabled
02 Primary enabled, secondary alert mode
03 Primary enabled, secondary monitor mode
04 Primary enabled, secondary transmit mode
|
| 01 | 10 | Configuration Flags (see table) |
| 02 | 00 | Digital output control
00 off
01 on
02 1/2 sec on pulse |
| 03 | 32 | Hang timer preset, in tenths |
| 04 | 1e | Primary receiver timout timer, in seconds |
| 05 | 1e | Secondary receiver timout timer, in seconds |
| 06 | 36 | id timer preset, in 10 seconds |
| 07 | 00 | fan timer, in 10 seconds |
| 08 | 01 | primary receiver courtesy tone |
| 09 | 11 | primary receiver courtesy tone
secondary transmitter enabled |
| 0a | 31 | primary receiver courtesy tone
secondary receiver alert mode |
| 0b | 03 | secondary receiver courtesy tone |
| 0c | 33 | secondary receiver courtesy tone
secondary transmitter enabled |
| 0d | 00 | reserved |
| 0e | 0f | 'O' OK Message |
| 0f | 0d | 'K' |
| 10 | ff | EOM |
| 11 | ff | EOM |
| 12 | ff | EOM |
| 13 | ff | EOM |
| 14 | 05 | 'N' NG Message |
| 15 | 0b | 'G' |
| 16 | ff | EOM |
| 17 | ff | EOM |
| 18 | ff | EOM |
| 19 | ff | EOM |
| 1a | 03 | 'T' TO Message |
| 1b | 0f | 'O' |
| 1c | ff | EOM |
| 1d | ff | EOM |
| 1e | ff | EOM |
| 1f | ff | EOM |
| 20 | 0a | 'R' TO Message |
| 21 | 22 | 'B' |
| 22 | 00 | ' ' |
| 23 | 03 | 'T' |
| 24 | 0f | 'O' |
| 25 | ff | EOM |
| 26 | 09 | 'D' CW ID starts here |
| 27 | 02 | 'E' |
| 28 | 00 | space |
| 29 | 05 | 'N' |
| 2a | 10 | 'H' |
| 2b | 0a | 'R' |
| 2c | 15 | 'C' |
| 2d | 29 | '/' |
| 2e | 30 | '4' |
| 2f | 0a | EOM |
| 30 | ff | EOM |
| 31 | ff | EOM |
| 32 | ff | EOM |
| 33 | ff | EOM |
| 34 | ff | EOM |
| 35 | ff | EOM |
| 36 | ff | EOM |
| 37 | ff | EOM |
| 38 | ff | EOM |
| 39 | ff | EOM |
| 3a | ff | EOM can fit 20 letter id |
| 3b | ff | EOM (safety) |