Many modern amateur transceivers have a built-in packet radio connector. In most cases, this connector has all the signals required to interface a NHRC-3 repeater controller to form a simplex repeater.

This application note shows how to connect the Yaesu FT-2600 2-meter radio to the NHRC-3 to form a simplex repeater. No modifications to the radio or the controller are needed, this installation is as simple as wiring up a cable to connect the radio to the controller.

NHRC suggests a careful reading of Part 97 prior to operating a simplex repeater in the United States.

NHRC-3 to FT-2600 Simplex Repeater Application Note(16K)

Back to NHRC-3 page.