NHRC-3 Series Repeater Controllers
Programming Information Generator

Firmware Version 5.1 Only!
Click here for the Version 4.3 Tool

Use this page to quickly and easily generate programming information for the NHRC-3 repeater controller. Enter or select your settings below, then click the Generate button to generate the programming information. A new window will open that contains the programming information. Print and/or save this window. The data that is different than the default data provided when the controller is initialized is displayed in red.
Confirmation Message
Bad Command Message
Timeout Message
ID Message
Hang timer in tenths
Timeout timer in seconds
ID timer in tens
Tail Message Counter
No ISD device
Simplex Repeater Mode
Audio Delay is Present
Suppress Courtesy Tone
Suppress DTMF Muting
Use Tail Message for Courtesy Tone
Special ID Mode
NHRC-3 Repeater Controller Home Page
NHRC-3/M2 Repeater Controller Home Page
nhrc3/nhrc3prog.php, version 1.20, 12 December 2003
Copyright © 1997, Jeff Otterson, all rights reserved.
Copyright © 1998 - 2003, NHRC LLC, all rights reserved.