NHRC-3 Repeater Controller
Programming Information Generator

Firmware Version 4.3 Only!

Use this page to quickly and easily generate programming information for the NHRC-3 repeater controller. Enter or select your settings below, then click the Generate button to generate the programming information. A new window will open that contains the programming information. Print and/or save this window. The data that is different than the default data provided when the controller is initialized is displayed in red.

Confirmation Message
Bad Command Message
Timeout Message
ID Message
Hang timer in tenths
Timeout timer in seconds
ID timer in tens
Tail Message Counter
No ISD device
Simplex Repeater Mode
ISD1000
ISD1420
ISD2560
ISD2590
Suppress Courtesy Tone
Suppress DTMF Muting
Use Tail Message for Courtesy Tone

NHRC-3 Repeater Controller Home Page
NHRC-3/M2 Repeater Controller Home Page
/nhrc-3/nhrc3prog43.php, version 1.11, last modified 02 January 2005 17:30
Copyright © 1997-2005, NHRC LLC, all rights reserved.
Mail comments to