The NHRC-3/M2+ is an updated version of our popular NHRC-3/M2 repeater controller. It contains all the features of our NHRC-3+ Repeater Controller in a form-factor that that plugs in to the GE MASTR II.

Click image to view a bigger picture.

• Plugs in inside General Electric MASTR II mobiles and stations with no complicated wiring.
• Two Operating Modes:
  • Duplex Repeater Controller
  • Simplex Repeater Controller
• 4 user-recordable, non-volatile voice messages:
  • Initial ID Message
  • "Normal" ID Message
  • Timeout Message
  • Tail Message/Custom Courtesy Tone
• CAS, CAS and CTCSS, CAS or CTCSS and DTMF Access Modes
• "Intelligent" ID algorithm.
• Dedicated Fan Control/Digital output.
• 6 Programming Commands.
• 29 Control Operator Settings.
• 3 User Commands.
• Two saved setups.
• Touch-Tone remote control and programming.
• Hang timer, ID timer, Timeout timer, Fan Timer, and CW messages stored in non-volatile memory.
• Two Digital Inputs
  • Courtesy Tone Select 1.
  • Courtesy Tone Select 2.
• Four Digital Outputs.
• Jumper-selectable receiver deemphasis.
• LED CAS, CTCSS, PTT, and DTMF indicators. LEDs can be disabled for low-power applications.
• Connector for optional NHRC-DAD Digital Audio Delay, to fully mute DTMF and help eliminate Squelch Crashes.
• Connector for optional Communications Specialists TS-64 CTCSS Decoder.
• Supports optional NHRC-DAD digital audio delay for squelch tail elimination/reduction and total muting of DTMF.

• NHRC-3/M2+ Complete Manual (Version 1.1, 2005-Sep-27) (~280KB)
• NHRC-3/M2+ Complete Manual (Version 1.07, 2005-Jan-12) (~300KB)
• NHRC-3/M2+ TS-64 Application Note (12K)

• NHRC-VSQ Internal Volume/Squelch Controls for MASTR II
• NHRC-DAD-2 Digital Audio Delay

NHRC-3/M2+	90 seconds voice storage for ID messages or simplex repeater.	Retired Product Special Order Only Contact Factory
Shipping & Handling		See Shipping Info